FAG SNV100-F-L + 21309K + H309X108 + FSV609X108 Bearing

Bearing Classification
Contact Us

SNV100-F-L + 21309K + H309X108 + FSV609X108 | FAG Bearings | fag housings pdf
Online Messages
  • Split plummer block housings SNV | Bearing (Mechanical - Scribd

    Features Split FAG housings of series SNV, Figure 1, are designed according to a modular concept and are a development of the SN/SNE housings. Rolling 2: SNV housings are suitable for bearings of various diameter and width series, that have the same outside diameter, for example 100 mm for SNV100-F-L (2a).
  • FAG SPLIT PLUMMER BLOCK HOUSINGS OF SERIES SNV: for

    FAG supplies split plummer block housings of series SNV for shafts with di- ameters from 20 to 160 mm and for 3/4 to. 5 1/2 inches. The numbers in the housing codes in- dicate the housing bore and therefore the outside diameter of the suitable bearing. e.g. 100 mm in the case of SNV100. The main advantages of the SNV.
  • fag housings.pdf | Bearing (Mechanical) | Screw - Scribd

    the appropriate outside diameter of the appropriate bearing, of identical width. for the housing, Figure 2. for example 100 mm for SNV100-F-L. • Flat end faces on the housing. Suitable bearing types include base allow abutment against self-aligning ball bearings, barrel stops if high forces do not act roller bearings, split and
  • Bearing Housings - the Schaeffler Group

    Schaeffler Technologies with its brands INA and FAG is a leading worldwide supplier of rolling bearings, spherical plain bearings, plain bearings, linear products, accessories specific to bearings and comprehensive maintenance products and services. Schaeffler has approximately 40 000 catalogue products manufactured
  • Split plummer block housings SNV - the Schaeffler Group

    The digits in the housing desig - nation indicate the housing bore and thus the outside diameter of the appropriate bearing, for example 100 mm for SNV100-F-L. Advantages. Advantages of housings SNV are: • Simplified stockholding as a result of the modular concept. One housing size suitable for various shaft diameters.